Ensure reliable fastening with Type I Cross Recessed Pan Head Screws, meeting ASME B 18.6.3 - 2013 standards. With their durable construction and easy installation, these screws are ideal for diverse applications across industries.
Standard Compliance: Type I Cross Recessed Pan Head Screws conform to the rigorous specifications outlined in ASME B 18.6.3 - 2013, ensuring consistency and compatibility across applications. Meeting ASTM F837 and F468 standards, these screws guarantee reliability and performance.
Pan Head Design: Engineered with a pan head configuration, these screws offer a low-profile appearance with a flat bearing surface. This design provides ample contact area for distributing load forces, enhancing stability and preventing surface damage.
Cross Recessed Drive: Featuring a cross recessed drive, these screws facilitate easy installation with compatible tools. The recessed drive minimizes slippage during tightening, ensuring secure fastening and reducing the risk of damage to the screw head.
Versatile Application: Type I Cross Recessed Pan Head Screws are suitable for a wide range of applications, including electronics, machinery, and furniture assembly. Their versatile design and dependable performance make them indispensable for various fastening needs.
③,7#, 14#, 16#, 18#, 20#, 24# are for tapping screws only. ④,9/16, 5/8, 3/4 are for machine screws only. ⑤,The diameter of body on machine screws having other than trim heads shall not be less than the Class 2A thread minimum pitch diameter nor greater than the basic major diameter of the thread. ⑥,Machine Screw Length of Thread 1) Sizes No.5 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 1-1/8 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall, unless otherwise specified, have a minimum length of full-form thread of 1 in. 2) Sizes No.6 and smaller. Screws of nominal lengths equal to three diameters and shorter shall have full-form threads extending to within one pitch (thread) of the bearing surface of the head, or closer, if practicable. Nominal lengths greater than three diameters, up to and including 2 in., shall have full-form threads extending to within two pitches (threads) of the bearing surface of the head, or closer, if practicable. Screws of longer nominal lengths shall have a minimum length of full-form thread of 1.5 in. unless otherwise specified. ⑦,Machine Screw Material 1)non-heat-treated low carbon steel, such as1006 through 1038 2)When hardened machine screw are specified, they shall be made from low or medium carbon steel, such as 1018 through 1038, with or without boron, through-hardened to Rockwell C25-38 |